Polat Makina Offers Slop Oil And Bilge Water Solutions In The Field With Its Mobile Slop Oil Recovery System

Polat Makina, which has been serving in industrial centrifugal technologies since 1978, continues to offer smart solutions with its New Mobile Slop Oil Recovery System designed for the treatment of slop oil and bilge water in the field.

The system, which is located in a 40 ft container designed for a European customer, includes all equipment that provides the necessary process for the recovery of precious oil from slop oil and bilge water and the treatment of substances that may harm nature if left untreated. Both slop oil and bilge water consist of water, solids and valuable oils. With the Mobile Slop Oil Recovery System designed by Polat Makina; your process will not only be environmentally friendly; it will also help you save money by getting rid of the transportation costs of the product to be applied to the process thanks to the fact that the system is completely mobile and by recovering valuable oils.

The main equipment in the container is one three-phase decanter and two three-phase separators. In addition, there are control valves, stock tanks, heating elements, chemical dosing units and pumps to ensure the safe transfer of the product between the main equipment.

In addition, there is control equipment such as valves, heat sensors, pressure transmitters and flow measurements to ensure that the process is carried out safely. The PLC system in the container continuously monitors and automates the process.

How Does The Mobile Slop Oil Recovery System Process Work?

The container in which the Mobile Slop Oil Recovery System is located is opened after reaching the area where the process will be carried out. After the air, water and electrical connections are made and the product inlet-outlet ducts are connected, the system is preheated. After this heating process, the product is transported to the first decanter through the pumps.

In the decanter, the product is divided into three phases. These are the Solid phase, heavy phase and light phase. The heavy phase containing a dense amount of water is sent to the first separator. In this separator, the oil is separated from the water. The obtained oil is sent to one stock tank and the obtained water to the other stock tank. Subsequently, the light phase containing a dense amount of oil is sent to the second separator. In this separator, the water is separated from the oil. Finally, the oil obtained in this process is sent to the stock tank containing the oil obtained from the first separator; the water obtained in this process is sent to the stock tank containing the water obtained from the first separator. The water and solid phase obtained as a result of the process are discharged of from the system to be disposed of with a different system.

In short, thanks to the Mobile Slop Oil Recovery System designed by Polat Makina, it is possible to treat the residual slop oil and to recover the valuable oils in it in the field, that is, to carry out the process without allocating space for this system in the factory.